Maintenance of lamps after decoration

In the maintenance of lamps, you need to pay attention to the following five rules

First, after buying back the lamp, do not rush to install it, you should carefully read the marking of the lamp and read the installation manual, and then install and use the lamp according to the instructions, otherwise it may be dangerous;

Second, replace the aging lamp in time according to the light source parameters provided by the sign. If it is found that the two ends of the lamp are red, the lamp is black or has shadows, and the lamp does not turn on, the lamp should be replaced in time to prevent the occurrence of ballast. Unsafe phenomena such as burnout of the device;

Third, during cleaning and maintenance, care should be taken not to change the structure of the lamps, nor to replace the parts of the lamps casually. After the cleaning and maintenance, the lamps and lanterns should be installed as they are, without missing or wrong installation of lamp parts;

Fourth, the lamps and lanterns need to be strengthened in use to prolong their service life. The lamps in the room should be wiped with dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage and short circuit for a long time; lamps installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to preventing oil fume, because the accumulation of grease will affect the illumination of the lamp; the light-colored lampshade has better light transmittance, but it is easy to stick to dust, so it should be wiped diligently to avoid affecting the light penetration; If the lamp is non-metal, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect;

Fifth, try not to switch on and off frequently when using lamps, because the current through the filament is greater than the current during normal operation at the moment of frequent start-up of the lamp, so that the temperature of the filament rises sharply and accelerates the sublimation, which will greatly reduce its service life. Therefore, it is necessary to minimize the switching of lamps and lanterns.

Everyone has a different understanding of home. How can we decorate the most perfect home with limited funds? When it comes to home renovations, many homeowners are concerned about the cost of renovations. Therefore, before the decoration, we must plan well, only good planning can reduce the cost. If the undecorated living room is likened to a canvas, the decoration is likened to a painting process, and the lighting is the finishing touch on this home picture.

However, if you don't get the cleaning and maintenance it deserves, even high-end lighting will quickly fade away. Like other furniture, lamps also need regular cleaning and maintenance to maintain the brightness of the lamps and prolong the life of the lamps. The lampshade is getting dim due to dust. If it is not dealt with in time, the brightness will be reduced by about 30% a year on average. Therefore, it is particularly important to regularly clean the lampshade and lamp tube or bulb.

special reminder

Moisture can easily cause lamps and lanterns to rust, peel off paint, and shorten the service life of lamps. Therefore, moisture-proof is the key to lighting maintenance, especially the lamps in bathrooms, bathrooms and stove headlights in the kitchen. Moisture-proof lampshades should be installed to prevent moisture intrusion and avoid rust damage or leakage short circuit.

It is best not to clean the lamp with water, just wipe it with a dry cloth dampened with water. If you accidentally touch the water, try to dry it as much as possible. Do not wipe it with a wet cloth immediately after turning on the lamp.